How to Wash a Rug in Washer

Are you looking for a way to keep your area rug looking as good as new? Are you tired of the backbreaking work that comes with cleaning up after spilled juice or dirt tracked in from outdoors? Have no fear! With just a bit of preparation and the right supplies, washing an area rug in your washing machine can be done with ease.

How to Wash a Rug in Washer

In this blog post, we’ll show you how simple it is to get those rugs clean and presentable again without breaking out the old scrub brush. Keep reading for step-by-step instructions on how to wash a rug in washer – and make sure you have all the right supplies on hand so that when your next spill happens, all you have to do is get cleaning!

Supplies You Will Need to Wash a Rug in Washer

  1. Vacuum cleaner
  2. Washing machine
  3. Mild detergent or laundry soap without bleach or fabric softener
  4. Large towels
  5. Fan (optional)

Step-by-step Guidelines on How to Wash a Rug in Washer

Step 1: Prep the Rug for Washing

Before we get started with the washing process, it’s important to prepare your rug properly. Start by giving it a good vacuuming on both sides to remove any loose dirt and debris.

This will also help fluff up the fibers of the rug, making it easier for them to get clean in the washer. Preparing the rug also means checking for any stains and pre-treating them with a stain remover if necessary.

Step 2: Check Rug Label for Care Instructions

Before you toss your rug in the washing machine, be sure to check the label for any specific care instructions. Some rugs may have special cleaning requirements, such as being hand-washed or only washed on a delicate cycle. Following these instructions will help ensure that your rug comes out clean and undamaged.

Step 3: Load the Rug into the Washing Machine

 Load Your Rug Into the Washing Machine

Now it’s time to load your rug into the washing machine. Depending on the size of your rug and your washer, you may be able to fit more than one rug at a time. Just make sure not to overload the machine, as this can result in an uneven wash and potential damage to the rug. This is also a good time to add mild detergent or laundry soap to the machine according to the manufacturer’s instructions.

Step 4: Add Detergent and Select Settings

Add a mild detergent or laundry soap without bleach or fabric softener to the washing machine. Use about half the amount you would normally use for a regular load of laundry. Then, select a gentle cycle with cold water and start the washer. Avoid using hot water, as this can shrink or damage the fibers of the rug.

Step 5: Dry the Rug

Once the wash cycle is complete, take your rug out of the washing machine and gently squeeze out any excess water. Do not wring or twist the rug, as this can cause it to lose its shape. Next, lay down large towels and place the rug on top to absorb any remaining water. You can also use a fan or open windows to help speed up the drying process.

Step 6: Vacuum Again

After your rug is completely dry, give it another quick vacuum to remove any flattened fibers or loose dirt that may have accumulated during the washing and drying process. Make sure to vacuum in the direction of the fibers for best results.

Following these simple steps will have your area rug looking clean and refreshed in no time. Remember to always check the label and use appropriate cleaning supplies when washing a rug in your washer.

With this easy method, you can say goodbye to backbreaking work and hello to a hassle-free way of keeping your rugs clean! So next time you have a spill or just want to freshen up your rug, give this method a try and see the amazing results for yourself. Happy cleaning!

Additional Tips and Tricks to Wash a Rug in Washer

1. Use cold water – While most of us are used to using warm or hot water for our laundry, it’s actually better to wash a rug in cold water. This is because hot water can shrink or damage certain types of rugs, especially delicate ones like wool or silk. Cold water also helps prevent colors from bleeding and keeps your rug looking vibrant.

2. Use gentle detergent – Just like with the temperature of the water, it’s important to use a gentle detergent when washing your rug in the washer. Harsh chemicals can damage the fibers of your rug and cause discoloration. Look for a mild detergent specifically designed for delicate fabrics or wool.

3. Avoid fabric softener – While fabric softener may leave your clothes feeling extra soft, it’s not recommended for washing rugs in the washer. This is because fabric softeners can create a barrier on the fibers of your rug, making it less absorbent and reducing its ability to trap dirt.

It's Best to Pre-treat Them

4. Pre-treat stains – If you have any stains on your rug, it’s best to pre-treat them before washing. This will help ensure that the stain is fully removed during the wash cycle. You can use a specialized stain remover or simply apply a mixture of water and mild detergent to the affected area.

5. Don’t overload – It can be tempting to throw all of your rugs into one load, but it’s important not to overload your washer. Not only can this damage the machine, but it also prevents the rug from getting a thorough clean. Make sure there is enough space for the rug to move around and agitate properly in the washer.

6. Use a gentle cycle – When selecting the washing cycle, choose a gentle or delicate setting to wash your rug. This will prevent excessive agitation and ensure that your rug is treated with care.

7. Avoid high spin speeds – Similarly, it’s important to avoid high spin speeds when washing your rug in the washer. This can cause damage to the fibers and lead to fraying or unraveling. Instead, opt for a lower spin speed or even skip the spin cycle altogether and lay the rug flat to dry.

8. Use a mesh laundry bag – For smaller rugs or those with delicate or loose fibers, it’s a good idea to place them in a mesh laundry bag before washing. This will prevent them from getting tangled or damaged by other items in the load.

9. Air dry or low heat – When it comes to drying your rug, it’s best to avoid high heat settings. Instead, opt for air drying or using a low heat setting to prevent shrinkage and damage. If possible, lay the rug flat or hang it over a clothesline or shower rod to dry.

10. Brush out any knots or tangles – After washing and drying your rug, it’s important to brush out any knots or tangles that may have formed. This will help fluff up the fibers and keep your rug looking clean and soft.

Following these tips and tricks can help ensure that your rug comes out clean and in good condition after being washed in the washer. Remember to always check the care instructions on your rug before washing and don’t hesitate to seek professional cleaning services if needed. With proper care, your rugs can last for years to come!

Frequently Asked Questions

Can All Types of Rugs Be Washed in a Washer?

Antique Rugs May Require Special Cleaning

Yes, most types of rugs can be safely washed in a washer. However, it is important to check the care instructions on the rug or contact the manufacturer for guidance. Some delicate or antique rugs may require special cleaning methods and should not be washed in a washer.

Can I Use Regular Laundry Detergent to Wash My Rug?

No, it is recommended to use a mild detergent specifically made for washing rugs. Regular laundry detergent may contain harsh chemicals that could damage the fibers of your rug. These detergents are also designed for clothing and may not effectively clean your rug.

Are There Any Precautions I Should Take Before Washing My Rug?

Debris by Shaking or Vacuuming the Rug

Yes, it is important to check for any stains or spots on the rug and treat them before washing. Also, make sure to remove any loose dirt or debris by shaking or vacuuming the rug before placing it in the washer. If your rug has a rubber backing, it is best to remove it before washing as it can get damaged in the washer.

Can I Wash My Rug with Other Items?

It is not recommended to wash your rug with other items in the same load. This could cause tangling and damage to both the rug and other items. It is best to wash your rug separately or with other similar rugs.


All in all, knowing how to wash a rug in washer is an important skill to have, especially if you have rugs in high-traffic areas that need frequent cleaning. By following the proper steps and using the right products, you can effectively wash your rug in a washer without causing any damage.

Remember to always check the care instructions and test a small area before washing your entire rug. With some care and attention, you can keep your rugs clean and looking like new ones for years to come. So, don’t be afraid to give your rug a good wash in the washer when it needs it! Happy cleaning!

Photo of author

Jennifer Branett

Leave a Comment