How to Raise Bed Without Legs

Are you dealing with a bed that keeps sinking in the middle? Are you looking for an easy way to raise your bed without needing extra legs? If so, then this blog post is just what you need. Here, we’ll provide step-by-step instructions on how to raise bed without legs by using simple materials from around your home—no tools or hardware have to be purchased!

We will also discuss some tips and tricks when it comes to raising beds effectively. So if your mattress needs a little lift after years of wear and tear, let’s get started!

How to Raise Bed Without Legs

Tools and Materials You Will Need to Raise Bed Without Legs

  1. Two wooden boards of equal length
  2. Four flat pieces of wood, such as plywood or particle board (enough to fit underneath the bed frame)
  3. Four furniture sliders
  4. Measuring tape

Step-by-Step Guidelines on How to Raise Bed Without Legs

Step 1: Measure Your Bedframe 

Using a measuring tape, measure the length and width of your bed frame to determine how many sliders you need and what size flat pieces of wood are necessary. Measuring the bed frame is essential to ensure your sliders and flat pieces of wood will fit underneath it. You need to make sure all these pieces fit snugly before you move on to the next step.

Measuring the Bed Frame

Step 2: Place the Sliders Underneath Your Bedframe 

Once you’ve measured the bed frame, place the furniture sliders underneath it. Make sure they’re evenly spaced and that they aren’t too close or too far away from each other. Placing them too close can damage the bed frame, and placing them too far away won’t provide enough support.

Step 3: Place the Wooden Boards on Top of the Sliders 

Once you’ve ensured that the sliders are in place, take your two wooden boards and place one on each side of the bed frame—on top of the furniture sliders. Make sure they’re evenly spaced, and make sure they’re secured to the bed frame with screws or nails. This step is important to provide extra stability for the bed frame.

Step 4: Place the Flat Pieces of Wood Underneath the Bedframe 

Now it’s time to place the flat pieces of wood underneath your bed frame. Make sure they fit snugly between the two wooden boards. This will provide extra support and stability, ensuring your bed frame won’t sink in the middle any longer.

In this step, make sure to use screws or nails to secure the flat pieces of wood in place.

And there you have it—a simple way to raise your bed without needing legs! If done correctly, this method of raising beds should be strong enough to last for years to come. Plus, it’s a great way to save money on buying extra hardware or tools. So if you’re looking for an easy and affordable way to raise your bed without legs, this method is definitely worth giving a try!

Additional Tips and Tricks to Raise Bed Without Legs

1. Place risers at the head and foot of the bed frame for extra support. You can purchase these from your local home improvement store or online. The risers should be designed to fit under the bed frame securely, so check the packaging to make sure they are compatible with your bed size and weight limit before purchasing them.

2. Another option is to use a bed wedge, which is specifically designed to raise the head of the bed without legs or risers. The wedge will fit securely between your mattress and box spring, providing extra support while elevating the head of the bed for increased comfort and improved circulation.

Use a Bed Wedge

3. If you want an even higher elevation, consider purchasing a bed frame extender. This will allow you to raise the height of your bed without having to buy new legs or risers. These frame extenders are easy to install and relatively inexpensive.

4. If none of these options work for you, there is another trick that can help: Place plastic furniture risers under the bed frame’s four corner legs. This will raise the bed higher without having to buy any special tools or supplies.

5. Finally, if you are looking for a more permanent solution, consider adding caster wheels to your bed frame. These can easily be purchased at most home improvement stores and will provide an easy way to raise and lower the bed with just a few turns of a crank. This is one of the most convenient ways to adjust your bed height without having to buy new legs or risers.

Raising your bed frame can improve comfort, and circulation, and even help reduce back pain. With these tips and tricks, you should be able to find a solution that fits your needs and budget. Don’t hesitate to try different options until you find the one that works for you! Good luck!

Precautions Need to Follow for Raising Bed Without Legs

1. Before attempting to raise the bed, check that all screws and bolts are tightened securely. If any parts are loose, replace them before raising the bed.

2. Inspect that the floor and walls around the bed can support its weight when raised. The bed should not be placed in an area with weak or uneven surfaces.

3. Make sure the mattress is firmly attached to the frame before lifting it. If necessary, use crossbars between the frame and the bed to secure it in place.

Use Crossbars Between the Frame

4. Place a blanket or other cushioning material underneath the bed where it will rest when raised, as this will provide extra support for it.

5. Carefully lift the bed using two people, one on either end of it, and keep it at waist height when lifting to prevent any strain or injury.

6. When placing the bed in its new position, make sure it is level and that all parts are firmly secured in place before letting go.

7. Do not attempt to raise the bed if you are uncertain about your ability, and seek professional help instead.

8. After setting up the bed in its new position, periodically check that all parts are still secure and that no damage has occurred over time.

Raising a bed without legs can be a tricky task – however, doing so safely and securely is possible with the right precautions. Following these guidelines will help ensure that your bed stays in its new position for a long time to come.

Common Mistakes in Raising Bed Without Legs

1. Using the Wrong Tools: 

When raising your bed without legs, it is important to use the right tools for the job. This means using a wrench or screwdriver of appropriate size and strength as well as other necessary items like nuts and bolts that will fit securely. If you are unsure about which tools and items are needed for your specific bed frame, consult a professional.

Using a Wrench or Screwdriver

2. Not Checking the Structure of the Bed Frame: 

When raising your bed without legs, it is important to make sure that the structure of the frame is sturdy enough to hold up with additional height. This means inspecting all joints and screws thoroughly before adjusting any pieces of the bed frame. If any weak points are found, it is best to replace or reinforce them before proceeding.

3. Overloading the Bed Frame: 

Raising your bed without legs creates more weight on the frame, so it is important to make sure that the extra load does not exceed what can be safely supported. This means checking that any additional furniture placed upon the frame is not too heavy and that all components of the bed frame are securely attached.

4. Not Securing the Bed Frame: 

It is important to remember to secure the bed frame when raising it without legs, as any sudden movement or incorrect angle could cause an accident. Use wedges and shims to hold the frame in place while adjusting the bed height. Don’t forget to check that the wedges and shims are firmly in place before proceeding.

5. Ignoring Cautionary Instructions:

No matter how confident you may feel about raising your bed without legs, it is important to follow all manufacturer’s instructions in order to ensure that the process is done safely. Read all the instructions and warnings that come with your bed frame before adjusting any pieces or components to make sure you are doing it correctly.

By avoiding these mistakes, you can ensure that the process of raising your bed without legs is done safely and correctly. Following these simple tips will help you get the most out of your bed frame and avoid any potential accidents or injuries.


Knowing how to raise bed without legs is a useful skill to have. Not only can it help you save money on buying furniture, but it also helps create more space in your room. Additionally, raising the bed without legs allows for easier access and better air circulation under the bed.

There are many advantages to this technique, so consider implementing this creative solution in your own bedroom today! With a few simple steps and supplies, you can have your bed raised without having to rely on your legs for support. Try it out and see how much of a difference it makes!

Photo of author

Jennifer Branett

Leave a Comment